Have you ever wondered how to make your own shaved ice? To learn how, see this article.
content
Six Ways to Make Shaving Ice Effectively
Method 1: smashing method
We know that crushing ice without a machine may seem like a lot of work, but it's not. The first method, which we call the "smashing method," is the easiest way to make a delicious ice cream dessert from scratch.
raw material
- Waterproof bag with zipper
- rolling pin or hammer
- water
instruct
- Fill a ziplock bag about 1/4 full with water (or flavored water) and seal tightly before freezing in the refrigerator. Make sure the bag is lying flat on the floor. Flat ice cube shapes are easier to break.
- When the ice cream is ready, use a rolling pin, hammer, or other hard kitchen tool to tap and crush the ice cream.
- Keep crushing the ice cream until desired texture and consistency is achieved.
- After serving ice cream in a bowl, flavor it with syrup, condensed milk, or other toppings.
advantage:In addition to simply crushing ice with ubiquitous kitchen utensils at home,This technique is also a great stress reliever. To understand what we mean, imagine that you have complete freedom to crush all your stress. This easiest method is also the perfect base for shaved ice desserts.
inconvenience:The way you crush your ice cream with your tool will have a major impact on the consistency and texture of your ice cream. Unlike professional shaved ice machines, you can't really achieve the smoothness that the Japanese variety of shaved ice, Kakigori, is known for.
Method 2: Treat yourself to a hearty dessert
This technique comes in handy when you're afraid of sharp knives and can't find a hammer. The second method is similar, but instead of a knife, use a fork with sharp teeth to scrape off the ice. To get the most out of this shaved ice technique, simply give the ice some time to thaw.
advantage:If there is any advantage to using a fork over a sharp knife, the fork is safer. Also, since forks are such an everyday household item, it can be difficult to find one that is easy to use.
inconvenience:You don't even need to try the process to realize how time-consuming it is. Using a fork requires more patience and effort than the other methods on our list.
Method 3: Slicing and crushing
Have you ever wondered how to learn how to make shaved ice without a machine and with a knife? The possible uses of a knife are not limited to cutting and felling. Having a sharp knife on hand can save you from the expensive kitchen utensils you usually use to shave ice.
raw material
- Sharp knife (or katana sword, if you have one)
- beautiful shape or square container
- a clean cloth
- Cloth gloves or preferably chain protection gloves
- water
instruct
- You need to first pour water into a square container or ice mold and then freeze it to make a block of ice.
- Take the ice cream out of the freezer and let it thaw for 6 to 10 minutes. Following this critical step will make scraping the ice easier.
- Have a knife, gloves, and rag ready while you wait for the ice cream to defrost. Take the opportunity to sharpen the ice shaving blades as needed.
- After defrosting, cover the ice cubes with a clean cloth to keep them from slipping. To avoid ice burns, always wear gloves when handling ice cubes.
- After loading, carefully cut the ice in quick, repeated motions. Be careful as the ice can slide off easily.
- Scoop desired amount of ice into bowls, then add syrup and toppings.
advantage:Using this do-it-yourself method of shaving ice is the cheapest way to create a homemade dessert with a better texture and consistency than crushing it with a hammer.
inconvenience:First, this method is not recommended for children or anyone unfamiliar with handling sharp objects due to the risk of injury from moving ice. Also, it can be intimidating to strictly cut ice rather than crush it. But hey, get golden ice cream if you like it! just wear glovesbe very careful。

Method Four: Use an Ice Crusher
Ice picks and breakers are great tools for breaking up large chunks of ice.
Trust us, this is one ice ax to buy. We watched a lot of different ones. If you don't trust us, please contact usread reviews。
The molded rubber grip on this shredder is excellent and feels heavy in the hand. Our goal was to create a tool that was well made and durable. seem,They're also great for crushing frozen fruit into smoothies!
raw material
- ice blender
- A large ice mold or a plastic bag to freeze the water
- a clean cloth
- Protective gloves (optional, but also suitable for this:maximumrespected)
- water freezes
instruct
- freeze water in vats or molds
- Remove the frozen block from the mold and place it on a clean towel on a stable surface (to keep it from moving).
- carefulcrush a block of ice and store the pieces in a bowl or cup
- (Optional) Tuck the crumbs into the zipper and proceed to break with the hammer
advantage:You probably already have some at home, and they're inexpensive.
inconvenience:It's hard to control. Ice cubes can vary greatly in size.
Method 5: Use an ice pick (or a screwdriver if necessary)
A flathead screwdriver or old ice ax might be available. I tell you, it's perfect for crushed ice!
However, this option produces very large portions, which is a drawback. If you want finer crushed ice, start with this method and then use a hammer or rolling pin to further crush the ice in the plastic bag (as in step 1).
Also, it's quite dangerousPlease be careful with it! Of course, it's not a good idea to do this while drunk or otherwise high.
raw material
- Clean flat Anice Picker screwdriver
- A large ice mold or a plastic bag to freeze the water
- a clean cloth
- Protective gloves (optional, butmaximumrespected)
- water
instruct
- freeze water in vats or molds
- Remove the frozen block from the mold and place it on a clean towel on a stable surface (to keep it from moving).
- carefulcrush a block of ice and store the pieces in a bowl or cup
- (Optional) Tuck the crumbs into the zipper and proceed to break with the hammer
advantage:It's cheap, maybe you already have it at home
inconvenience:It's hard to control. The ice cubes are very irregular in size.
Method Six: Shave on Ice with a Razor
With electric ice shaving machines becoming more affordable, manual ice shaving machines are now less common in people's kitchens than they used to be. However, that doesn't mean these devices aren't great portable options for homemade ice cream.
Granted, not everyone has one in their home, but if they do, it's functional. Otherwise, you can buy them for very low prices on Amazon. We love what we buy, and this is it. Because it's cast from solid aluminum, it will never rust.
In this article, you'll learn how to use a manual razor, how to keep it in good shape, and a list of our favorite razors.
raw material
- Manual ice shaving machine (we have and love this)
- a large ice cube tray
- a clean cloth
- gloves (optional)
- water
instruct
- Essentially, this technique offers the fastest and most efficient way to prepare shave ice cream desserts at home. To easily scrape off more ice, you'll need to use a large container this time, as with other methods that require you to freeze the water first.
- Once the ice cubes are ready, defrost them for about 6 to 10 minutes.
- To prevent slipping, place ice cream under a clean cloth or in an airtight container. Also wear gloves when working with ice.
- Hold the ice and place the razor on top of the ice.
- If you push the razor away, it scrapes off the ice. Continue this step until the shaver chamber is full. If you need more shaved ice, empty the tray and drive over the ice in a similar fashion.
- Finally, place the shaped ice cream in a bowl and add your favorite toppings.
advantage:They are cheap, portable and consume no energy. Even the beach is a great place for fishing!
inconvenience:For a perfect shave, you may need to adjust and sharpen the blade a little. Also, it takes some practice to master them.
FAQs
How to make shaved ice? (6 effective methods) - iced drinks? ›
If using a commercial machine, we recommend letting your ice temper for about 10-15 minutes before shaving. If using a home machine, like the S900A Electric Shaved Ice Machine, we recommend letting the ice thaw for approximately 5-7 minutes. Allowing your ice to temper will create a fine and fluffy snow consistency.
What is the secret to fluffy shaved ice? ›If using a commercial machine, we recommend letting your ice temper for about 10-15 minutes before shaving. If using a home machine, like the S900A Electric Shaved Ice Machine, we recommend letting the ice thaw for approximately 5-7 minutes. Allowing your ice to temper will create a fine and fluffy snow consistency.
What is the best ice for shaved ice? ›Solid block ice is the preferred form of block ice used in the shaved ice industry. This type of block ice produces the best snow for shaved ice.